Fridge Y — 36QT powered fridge/freezer for Tesla Model Y sub-trunk

To keep Fridge Y running while your Tesla Model Y is parked, enable “Keep Accessory Power On” under Controls > Charging. This allows the vehicle’s low-voltage outlets to remain powered when no one is in the vehicle. Availability may vary by vehicle configuration and software version.

Fridge Y plugs directly into the low-voltage power outlet in the rear trunk. No modification or installation is required—just plug it in, set your desired temperature, and start cooling.

Yes. Fridge Y can also be used in other vehicles equipped with a compatible 12V or 24V power outlet, making it useful beyond your Tesla Model Y.

Please make sure the refrigerator is in MAX mode, because the temperature cannot be adjusted in ECO mode as we designed it.

1. Check Bluetooth and Location Settings:

• Ensure that Bluetooth is enabled on your mobile phone.
• Make sure that location services (GPS) are turned on as well.

2. Reinstall the App:

• If the issue persists, try uninstalling the app from your mobile phone.
• Download and reinstall the app from the app store.

Yes. In addition to vehicle power, Fridge Y can be powered by compatible portable power stations or other 12V/24V DC power sources. With the optional AC adapter, it can also be used from a standard household outlet.

Fridge Y uses a compressor refrigeration system, providing fast and efficient cooling and allowing it to operate as either a refrigerator or freezer.

Yes. Fridge Y can run continuously as long as it has a stable power supply. Power consumption varies depending on the set temperature, ambient temperature, and how often the compressor cycles. When parked, supported Tesla Model Y vehicles can use “Keep Accessory Power On” to keep the low-voltage outlet powered.

Fridge Y is designed for efficient compressor operation and cycles on and off after reaching the set temperature. When using it while parked, the vehicle will consume some energy to keep accessory power available. We recommend monitoring your Tesla’s battery level during extended use.

Refrigeration issues can be categorized into three types: slow refrigeration, failure to refrigerate, and incorrect temperature display. Here’s how to diagnose and address each issue:

1. Slow Refrigeration:

       Possible Causes:

•  High ambient temperature or overcrowding inside the refrigerator.

       Solution:

• Ensure there is adequate ventilation around the refrigerator.
• Place the refrigerator in a cooler environment if possible.
• Reduce the amount of food stored inside and allow space for better air circulation.

1. Failure to Refrigerate:

        Possible Causes: 

• Insufficient refrigerant or compressor malfunction.

        Solution:

• Check if the refrigerator compressor is operational.
• Set the refrigerator temperature to -4°F (-20°C) and place a cup of water inside.
• After twelve hours, check if the water is frozen.
• If the compressor does not work, email our customer support: hello@carfrozen.com for further assistance. We will coordinate with the factory to resolve the issue promptly.

1. Incorrect Temperature Display:

        Possible Causes:

•  High ambient temperature or incorrect temperature settings.

        Solution:

• Adjust the temperature compensation value as needed.
• Contact our support team: hello@carfrozen.com to guide you through the adjustment process based on your feedback.
• If the displayed temperature differs significantly from the actual temperature and the refrigerator freezes, consider replacing the refrigerator operation panel.

If the problem persists, it may indicate a faulty thermometer, and we will arrange to send you a replacement.

Make sure Fridge Y is in L position, otherwise F2 will be displayed.

The F4 and F5 errors indicate poor heat dissipation, typically occurring when the ambient temperature around the refrigerator exceeds 120°F (49°C). Here are steps to resolve these errors:

1.Increase Ventilation:

• Improve the ventilation around the refrigerator.
• Ensure there is adequate airflow to help dissipate heat effectively.

2.Optimal Placement:

• If using the refrigerator in a car, avoid placing it in a confined space or groove.
• Instead, place it directly in the trunk of the car to allow better airflow and heat dissipation.